Exposure Units

 

Sureprint self contained exposure units, are manufactured in a split construction to allow access through standard doorways. The range includes five standard models plus our new Lumex range with different power level options. Each exposure unit is fitted with a PLC integrator or a standard timer depending on customer requirements.

Introducing the Lumex LED Range

 

These exposure units have been developed to produce fast exposures, give hard stencils, whilst at the same time reduce electrical energy consumption, and reduce the amount of spare parts required over it's lifetime. These units are single phase 5 Amps. They are easily split to go through a standard doorway and can be table mounted if required.

 

A standard Lumex exposure unit has a fast vacuum pump which which creates a high pressure vacuum in around 3-4 seconds, exposure times vary from 30 - 60 seconds depending on the emulsion used and the number of coats applied to each side of the stencil.

 

Our specially developed LED's typically have a lifespan of 50,000 hours, compare that to a metal halide lamp which typically lasts for around a 1000 hours. The unit pays for itself over it's life time by the electrical energy savings made and replacement lamp savings.

 

The Lumex range is also available in our combination exposure unit and drying cabinet ranges. 

 

Looking to upgrade your old exposure unit? Sureprint can provide a retrofit upgrade for your old system.

Self-Contained Exposure Units - Standard Options

 
Model 1, 46” x 29” Clear Glass Area (1165 mm x 730 mm) 1 or 2 k/w version

 

Model 2, 49” x 39” Clear Glass Area  (1245 mm x 990 mm) 1 or 2 k/w versions

 

Model 3, 50” x 68” Clear Glass Area  (1270 mm x 1725mm) 2 or 3/5 or 6 k/w versions

 

 

 

Power levels range from 1200 watt to 6 k/w systems rapid start or shutter variations are available. These units are totally enclosed and are suitable for work in an open workroom.

Actinic Range

 

This range offers the entry level user or educational establishment the oportunity to produce exellent quality stencils using a machine developed as a lower cost version of a self contained exposure unit. The stencils are as good as the Metal Halide range but take longer to expose due to the lower power levels of the machine.

Available in three satndard sizes these unit split down and will fit into the smallest space. the legs are removeable which makes istallations very easy. The Actinc range are also manufactured with drying cabinets underneath for space saving. Available in a variety of sizes to suit all frame sizes.

 

Three models of our combination drying cabinet and actinic exposure unit are available as standard, but other sizes can be fabricated to customer requirements. The combination units are especially good for areas where space is at a premium.

 

 

Light Sources

Print Print | Sitemap
© SUREPRINT