Drying Cabinets

 

 

Sureprint manufacture a wide variety of drying cabinets for different applications. Cabinets can be manufactured in any size and shape and be required to dry a wide variety of substrates including coated or washed screens or printed products. Screen drying cabinets are manufactured in two versions Horizontal cabinets designed to dry emulsion coated screens with the screens layed flat to keep emulsion level whilst drying.

 

Vertical drying cabinets are manufactured to allow frames to be placed upright allowing excess water to run off the screens into a drain after the washing process. Both types of cabinet can be made to any size and house any number of screens of different sizes.

 

The horizontal cabinets can be made to house up to thirty frames and an optional light table can be fitted to the top of 6 frame cabinets for artwork or stencil touch up. The standard range house six screens.  Actinic exposure units can be built into the top of our drying cabinets to provide a dual purpose machine that saves floorspace.

Standard Sizes.

 

                Screen Sizes                                                   

Model 1, 20''x 26''     (510mm x 660mm)       

Model 2, 50''x 40''     (1270mm x 1020mm)   

Model 3, 60''x 50''     (1525mm x 1270mm)

Model 4, 70''x 60''     (1780mm x 1525mm)   

Model 5, 90''x 70''     (2290mm x 1780mm)   

Model 6, 125'' x 70''  (3175mm x 1780mm)  

 

Any size can be made to order.

Actinic exposure unit mounted ontop of a drying cabinet.

Available in three standard sized unit these units are space saving machines designed to be multi purpose and minimise floor space.

Exposure test before shipping.

Each machine we build is rigorously tested before it leaves our factory. This ensures the machines are ready to work as soon as they are installed at customer facilities with little and no fuss.

 

 

Drying cabinet interior shows high volume recirculation fans, heater unit & shelves.

Drying cabinets can be manufactured with

6 - 30 trays depending on customer requirements and cabinet sizes can be made to order to suit user requirements.

 

 

Special drying cabinets.

Specially designed stainless steel cabinets, the above is two cabinets, one designed to fit on top of another, this allows access to the desired location, through single narrow doors. Dries washed screens in the bottom unit and dries coated screens in the top unit.

Vents fitted the the side of the unit allows moist air to be evacuated from the cabinet and piped to an external vent. 

 

 

The control panels are mounted on the right hand side of each unit and consist of a digital thermostatic controller and on / off switch.

Double doors allow easy access to each cabinet. The top unit has horizontal frame holders for emulsion coated screens, the bottom cabinet has vertical screen holders for washed screens.

DRYING_CABINETS_NEW.pdf
Adobe Acrobat document [4.8 MB]
Print | Sitemap
© SUREPRINT